Connecting Electronic Plugs

Name: johnsont
Telephone: johnsont@netvigator.
Price range: $$

此資訊已過期，不保證資訊準確性更新於: 2008-03-19 刊登者: johnsont

詳情內容

Connecting Electronic Plugs

1. Drill two 0.35mm/0.4mm holes on both sides of the plug.

2. Cut off around 1mm section from thin metal wire.

3. Insert the metal wires into the holes.

4. Paint the plugs in different usual colors.

5. Remove the inner metal wire from the black piping cord.

6. Widen the cord diameter with a drill.

7. Connect the piping cord together with the wires of the plug.

8. Prepare a shrink tube and a lighter.

9. Heat the shrink tube and stretch it out.

10. The final result after stretching.

11. Connect the stretched tube with the plug wiring as shown in figure.

相片

聯絡資訊此資訊已過期，不保證資訊準確性

聯絡人

johnsont

聯絡電話

johnsont@netvigator. 電話未進行認證

關鍵字

模型製作模型工具學砌模型砌模型技巧砌模型教人做模型