About us
HONG KONG HOMISH Co.Limted is situated at the business world trade centre -- HONG KONG of China. Since our company was establisied, our products have won good reputation among customers. Our company specializes in the genuine leather and the cloth sofa cover, leather bed and leather tea-table industry.
"HOMISH Furnishings" series of furniture produced by HOMISH conforms to faith of continuous improvement and offering the best service. "HOMISH Furnishings" outstanding quality, complete and fast customer service is marketed all over the country along with our products, and gains numerous approval and high praises.
How to Paint Wood Furniture |
| Painting furniture involves sanding, priming and painting. Have the patience to apply that second coat of paint, and you'll be rewarded with a better-looking, longer-lasting finish. |
| |
| |
| |
![]() | Steps: |
| 1. | Make sure there's no chance that your piece of furniture is an antique whose value could be destroyed by changing the finish. |
| |
| 2. | Set up your work area in a well-ventilated place with nothing around that could produce flames or sparks. |
| |
| 3. | Remove drawer pulls and other hardware. Place the furniture on a layer of newspaper or a disposable drop cloth. |
| |
| 4. | Sand the piece of furniture until smooth with fine-grit sandpaper or liquid sander. Wear gloves, safety goggles and a dust mask. (Image 1) |
| |
| 5. | Remove any residual sawdust with a hand vacuum, brush or barely damp rag - you don't want to wet the wood. (Image 2) |
| |
| 6. | Apply a coat of either white brush-on or gray spray-on water-based primer, depending on the size and area of the piece of furniture you intend to cover. (Image 3) |
| |
| 7. | Allow the primer to become dry to the touch; this usually takes 1 to 2 hours. If you're not sure, read the recommended drying time on your can of primer. (Image 4) |
| |
| 8. | If the primer coat looks spotty or thin, apply a second coat and allow it to dry. |
| |
| 9. | Sand any rough areas. (Image 5) |
| |
| 10. | Add a coat of water-based paint. Brush it on with even strokes, going in the direction of the wood grain. With spray paint, make slow passes with the can 8 to 12 inches from the wood surface. Allow the first coat to dry. |
| |
| 11. | Add a second coat and allow it to dry overnight. |
![]()
![]()
